How to hang LED strip lights without damaging wall? In this article, we’ll take a look at various harmless methods to help you achieve a seamless, harmless LED strip installation, whether it’s for general task lighting or bright light bulbs.
Contents
Non-damaging hanging methods
Non-damaging methods offer many advantages, allowing you to hang and remove LED strips and lights on wall without any damage while preserving the aesthetics of wall paint and the integrity of your living spaces.
Adhesive hooks
Adhesive hooks are an effective non-damaging way to install LED strip lights.
You can stick LED strip lights to walls using these hooks since they have a strong sticky coating that firmly attaches the strip light to the wall.
Selecting suitable hooks
Before purchasing hooks, ensure that they are designed to support the weight of your LED strip lights.
Think about the size and weight of the LED strips, and choose hooks with a lifting capacity that exceeds the combined weight of the strips.
Also, search for hooks created especially for flat areas like walls, as they will stick LED strip lights better.
Polishing the wall’s surface carefully
It’s essential to properly clean the wall’s surface for good adhesion between the glue and the wall. Use water and mild detergent to wash away any particles, dirt, or oils.
After cleaning, dry the area completely before proceeding with the installation.
Installing the hooks securely
The adhesive hook’s protective film should be peeled off to reveal the sticky side. Place the hook precisely where you wish to place the LED strip lights on the wall.
For optimal adherence, press firmly on the hook for a few moments.
To hang larger LED strips with many hooks, be certain to place them evenly apart and arrange them horizontally for a tidy setup.
Installation of LED strips
It’s time to install the LED strip lights after the hooks have been firmly installed. The LED strips you have can also have an adhesive backing, according to the type.
If they have, just remove the covering and delicately press the LED strips onto the hooks in the preferred pattern.
If your LED strips lack adhesive backing, you can still affix them to the hooks by using double-sided tape or velcro strips, which are extra sticky choices.
Mounting clips
Mounting clips are also an effective non-damaging method for hanging LED strip lights. These clips offer a secure grip on the LED strips and can be easily attached to various surfaces without causing any damage.
Different types of clips
There are several types of clips available, each designed to accommodate specific LED strip styles and installation preferences. Common types include:
- Standard clips. These are simple clips with an open design, suitable for LED strips that come with adhesive backing or have a flat surface on the back.
- Silicone clips. Designed for silicone-coated LED strips, these clips provide a gentle and secure grip without damaging the silicone material.
- Corner clips. As the name suggests, corner clips are used to secure LED strip lights around corners or edges, allowing for seamless transitions in the lighting design.
- L-shape and T-shape clips. These clips are ideal for more complex LED strip installations, providing a sturdy mounting option at various angles and junctions.
Attaching the clips to the LED strip lights
Make sure the LED strip lights are free of any dust or dirt before attaching the clips.
Simply remove the coating of protection from most LED strips with adhesive backing before pressing the clips firmly into the LED strips’ backside.
To maintain stability and avoid sagging, place the clips evenly spaced throughout the length of the LED strips.
If your LED strips do not have an adhesive backing, you can securely attach the clips to the back of the LED strips using double-sided tape or a suitable adhesive.
Aligning and securing the clips on the wall
Choose where you want the LED strip lights to go on the wall and indicate the spots where the mounting clips will go.
To attach the clips to the wall at the indicated locations, either remove the protective backing from the sticky side of the clip or use a suitable adhesive. To guarantee good adherence, press firmly.
Placing the lights onto the mounted clips
Gently put the LED strip lights into the clips after they are firmly fastened to the wall, making sure they fit properly.
Make sure the LED strips are securely fastened in place as you carefully guide them around corners or angles with corner or L-shaped clips.
Verify again that each clip is holding the LED strip lights firmly, and if required, modify the arrangement.
Magnetic strips
Hanging LED strip lights may be done easily and safely using magnetic strips.
You can quickly install and adjust your LED strips without damaging your walls by making use of magnets.
Acquiring magnetic strips for LED strip lights
You must first acquire magnetic strips made especially for LED strip lights.
The adhesive backing on one side of these magnetic strips makes it simple to attach them to the LED lights.
Make sure the magnetic strips have enough power to withstand the weight of your LED lights.
Installation of magnetic strips
To achieve effective adhesion, start by thoroughly cleaning the wall surface. Use a moderate detergent and water to clean up any dust, or grease, then allow the area to thoroughly dry.
Remove the protective backing from the magnetic strips’ adhesive side.
Place the strips on the wall where you intend to place the LED strip lights with care. To make sure they are straight and correctly aligned, use a level.
For a solid bond with the wall, press firmly against the magnetic strips for a few seconds. It’s recommended to use numerous magnetic strips and arrange them evenly along the intended path if you intend to add longer LED lights.
Attaching the LED strip lights to the magnetic strips
Direct mounting of LED lights with sticky backs is possible on the magnetic strips. The LED lights are simply carefully attached to the corresponding magnetic strips on the wall by simply peeling off the protective sheet from the adhesive side of the lights.
Make sure the LED lights are aligned evenly and smoothly with the full length of the fixture.
You can use additional double-sided tape or an appropriate adhesive to firmly attach the majority of LED lights without adhesive to the magnetic strips.
The LED strip lights will be held in place by magnetic force, creating a solid and robust installation without endangering your walls.
The advantage of using magnetic strips is that you can quickly move or remove the LED strip lights from their current location as needed, resulting in a very flexible and simple-to-use solution.
Important information! To prevent the magnetic field from impairing the performance of sensitive electronic equipment or gadgets, keep magnetic strips away from them when working with them.
To avoid any drooping or falling over time, make sure the magnetic strength is sufficient to sustain the weight of your LED strip light.
Small adhesive strips
An adaptable and safe way for LED strip light setup is with Velcro strips.
Velcro strips offer an easy way to place and adjust your LED lights without using adhesives or drilling holes because they are reusable.
Procuring velcro strips suitable for LED strip lights
Make sure to purchase Velcro strips for your LED strip lights that are strong enough to withstand the weight of the LED lights.
To find Velcro strips that are suitable for usage on walls, look for ones that have a stronger adhesive coating.
Affixing one side of the Velcro strip
Start by properly cleaning the LED strip lights’ backside to get rid of any dirt or residue. One side of the Velcro strip’s protective backing should be peeled off to reveal the adhesive surface.
Make sure the Velcro strip is evenly aligned throughout its whole length before gently pressing it into the back of the LED strip.
Installing the other side of the velcro strip on the wall
Use a mild detergent and water to thoroughly clean the wall surface where you plan to mount the LED strip lights before allowing it to dry completely.
The adhesive side of the other side of the Velcro strip’s protective covering should be peeled off. Place the velcro strip on the wall where you intend to hang the LED strips with care. Verify that the strip is horizontal and level by using a level.
For strong adhesion to the wall, press firmly against the Velcro strip for a few seconds. Use additional Velcro strips placed properly along the required path for lengthier light strip installations.
Attaching the LED strip lights to the Velcro strips
Now that the Velcro strips adhere to both sides, it will be simple to attach the LED strip lights to the wall-mounted lights.
The light strips ought to be firmly held in place by the velcro’s grip. As you attach the LED lights to the velcro strips on the wall, pay attention to their alignment and straightness.
The flexibility of readily adjusting the arrangement of the light strip lights is a benefit of using velcro strips.
You may accomplish this without leaving any traces behind or endangering your walls if you choose to temporarily rearrange the lighting or take the LED strips down.
Important note! Depending on the weight and length of your LED strip lights, consider using multiple Velcro strips for added support.
Tips for a secure and clean installation
You can ensure a safe and tidy installation of wall LED strip lights by paying attention to the advice provided here.
- Wall cleaning before installation
It’s crucial to carefully clean the wall surface before installing any non-damaging method to hang LED strip lights.
Grease, filth, and dust can damage the stability of the installation and reduce the adhesive’s efficiency.
Clean the wall with water and mild detergent, then make sure it is totally dry before attaching LED strip lights.
Better adhesion will be encouraged by a clean surface, so you could stick LED strip lights without any harm.
- Providing flat placement and precise alignment
The LED strip lights must be properly aligned and positioned to provide a polished and aesthetically pleasing installation.
Check that the strips are aligned and equally spaced along the intended path by using a level. An imbalanced and unpleasant lighting show can be produced by LED strips that are positioned unevenly.
Before affixing the hooks, clips, magnetic strips, or Velcro, take the time to measure and record the positions to ensure a tidy and well-organized installation.
- Evaluating the hanging method’s weight capacity
Weight capacities differ among various non-damaging hanging techniques. Make sure the method you choose can support the weight of your LED strip lights.
For information on the maximum weight that the adhesive hooks, mounting clips, magnetic strips, or Velcro strips can support, consult the manufacturer’s specifications.
Consider using additional hooks or clips for further support if you intend to install longer or heavier LED strips. The LED strip lights may eventually sag or fall if the weight limit is exceeded.
- Tidying up cables and loose ends
Make sure to securely secure any extra cords or loose ends after mounting the LED strip lights. To organize the cables and stop them from hanging carelessly, use cable clips or cable management tools.
In addition to enhancing the installation’s appearance, effective cable management lowers the chance that the wires and connectors may be accidentally damaged. To prevent tying up the LED’s light output, choose transparent cable ties.
- Avoiding places that are muggy or humid
Even while non-damaging hanging techniques are made to withstand mild moisture exposure, it is still crucial to avoid mounting LED strip lights on wall in overly humid or moist areas.
Long-term moisture exposure can make the hooks, clips, magnetic strips, or Velcro strips less adherent, which could cause the wall surface to separate or get damaged.
If you want to hang LED strip lights on wall in places with a lot of humidity or moisture, think about buying waterproof LED strips or checking the installation instructions provided by the manufacturer.
Conclusion
With the various non-damaging hanging methods available, you can transform your living spaces and learn how to hang led strip lights without damaging wall.
FAQ
Will LED light strips damage walls?
No, LED light strip typically does not damage walls when you stick LED strip lights correctly using non-damaging hanging methods.
By avoiding traditional installation techniques such as drilling holes or using nails for the entire stripand opting for alternatives, you can securely hang LED light strip without causing any damage to your walls.
How do you hang lights without damaging paint?
Adhesive hooks. These hooks have a strong adhesive back, which adheres to the wall without causing any damage when removed.
Mounting clips. Designed to grip onto LED light strips and attach to the wall, clips offer a secure and damage-free installation.
Magnetic strips. Using the power of magnets, these strips can be attached to both the LED light strips and the wall, providing a reliable non-damaging solution.
Velcro strips/command strips. Velcro strips allow for easy attachment and removal of LED light strips, offering flexibility and no damage to the wall surface.
Mounting putty. Reusable and residue-free mounting putty allows you to adjust and reposition the LED lights as needed. Tear off a small portion of mounting putty, knead it until pliable, and press it onto the back of the LED lights. Then, apply the putty to the desired location on the wall and press the LED lights firmly in place.
Cable ties. Cable ties, also known as zip ties, are versatile and durable fastening tools commonly used to install LED lights. Wrap the cable ties around the LED lights and secure them tightly to the desired mounting surface. Trim off any excess to hang LED lights securely.
How do you get LED lights off the wall without peeling paint?
Follow these steps:
Adhesive hooks. Gently peel the hooks off the wall in a slow and steady motion. If you encounter resistance, use a hairdryer to warm the adhesive, making it easier to remove without damaging the paint.
Mounting clips. Carefully detach the LED light strips from the clips, then remove the clips from the wall by sliding or pulling them off gently.
Magnetic strips. Separate the magnetic strips attached to the LED light strips from the ones mounted on the wall by sliding them apart horizontally.
Velcro strips. Slowly detach the LED light strips from the velcro strips on the wall. Avoid pulling too forcefully to prevent any paint damage.
If you find any residue left on the wall after removing the LED lights, use a mild adhesive remover or rubbing alcohol to clean the area gently.